Elcocarb B/DC

Elcocarb B/DC is a graphite/carbon-black ink for the deposition of active highly conductive carbon layers by slot-die coating. Elcocarb B/DC is specifically suited for the making of carbon cathodes in monolithic Perovskite Solar Cells.

Elcocarb B/DC contains 1–20 µm graphite particles and carbon-black nanoparticles. Firing at 400°C leads to a remarkably highly conductive, hydrophobic and non-metallic layer that remains porous. The chemical inertness of this layer enables a broad range of material compatibility with no risk of corrosion.

Carbon films obtained from Elcocarb B/DC demonstrate excellent adhesion on a variety of substrates, such as coated glasses and ceramic surfaces. They can ideally replace glass counter-electrodes in monolithic solar cell assemblies when used in conjunction with our Ti-Nanoxide and Zr-Nanoxide products.

Those layers also feature a very good electron transfer rate to iodide-based Dye Solar Cell electrolytes like our Iodolyte and Mosalyte products, as well as towards hole transporter materials and perovskite layers.

Intended for :

slot-die coating

Aspect :

black viscous paste

Resulting layer :

opaque black (after firing)

Sheet resistivity :

≤25 ohm/sq. (given a typical 15 µm thick layer)

Treatment :

400°C for ~40 min

Carbon composition :

≤20 µm graphite particles, mixed with carbon black nanoparticles

Concentration :

~11.25%wt.

Medium :

terpineol, alcohols, organic binders